Applicator, Fog, High Pressure

Back
> Applicator, Fog, High Pressure
Description The high pressure fog applicator is made of aluminum alloy. It is tubular in shape measuring 40 mm in diameter and 2.49 m in length. It has a 65 mm diameter ball valve and fitted with a 63.5 mm (2 1/2”) male instantaneous coupling. When operated under a water pressure of 10 bars, it will produce a cylindrical water spray in fine mist of 8 m diameter at a projection of 4 m from the tip. The water output is approximately 1200 litres per minute dispersing through a total of 281 holes each of 1.6 mm in diameter.
Function Water droplets from this high pressure fog applicator will reduce the fire ground temperature to allow firemen to gain access. Some of the droplets will turn into steam and absorb heat from the fire, the remaining will wet the surface of nearby combustible materials to delay combustion.
Video Play video